WATER TREATMENT CHEMICALS AND MINERALS
CHEMICALS AND MINERALS
ANTISKALANT
They are chemicals used as antiscalant and membrane cleaner in reverse osmosis systems. Prevents and cleans deposits of hardness salts, iron oxides. In this way, it increases system efficiency. It delays the clogging of the membranes. Thanks to the active substances it contains, it increases the membrane cleaning interval. It provides a safe working environment by eliminating the use of acid. It is effective even at low dosages. Compatible with all membrane types. It is more durable and effective than sodium hexametaphosphate. Thanks to its strengthened formula, there is no loss of efficiency during use or storage. It has been approved by NSF for use in drinking water production up to 5 ppm (mg/l).
ACIDIC MEMBRANE WASHING CHEMICAL
The most common chemicals used for membrane cleaning are Acid and Alkali based. Acidic cleaners are used to remove iron and inorganic residues and should be done at a pH of about 2-3. Alkaline cleaners are used to remove biological materials, organic and silica residues and should be done at a pH of about 10-11.
BASIC MEMBRANE WASHING CHEMICAL
There are 2 types of membrane cleaning chemicals, acidic and basic. First of all, the minerals accumulated in the membranes are cleaned by acidic washing, and the system flushes and delivers the residual chemical to the drainage line. Afterwards, organic residues are removed by basic washing and the flush system is activated again. Acidic and basic washing are the most commonly used membrane cleaning chemicals. But in some cases it can be used in different chemicals (silica, calcium, sulfate, sulfur precipitates).
PH LOWER
It is used to lower the pH value in pools.
It is compatible with automatic feeding systems.
Easy to use and economical.
LIQUID CHLORINE
It is a product used for chlorination in water treatment systems and swimming pools. Its chemical name is sodium hypochlorite. Sodium hypochlorite is used for disinfection of drinking water and other water channels. Chlorine-based disinfectants are used with dosing system in drinking water, utility water, well water, pool water. Liquid chlorine is a chlorination product that is easy to transport and very simple to use. In provinces, districts and villages, water chlorination is done with liquid chlorine. Apart from water purification, it is also used in industry for different purposes.
FLOATING
It ensures that small particles that cannot be retained in the filter are retained.
It clarifies the pool water.
It is easy to use and economical.
ACTIVATED CARBON
Substances such as turbidity, color, odor, taste, chlorine and chlorine compounds, detergents, petroleum industry wastes and asbestos in water are primarily harmful to human health and render water undrinkable and unusable. Compounds that cause discoloration and odors in water are organic substances. The high probability of microbe growth in the presence of organic matter makes the amount of organic matter important. Absorption property of activated carbon is used to remove these harmful substances from water. Chlorine, which is free in your water and causes unpleasant odors, is removed by the active carbon layer.
ANTHRACITE
It is used for the removal of water-insoluble sand, mud and sediments, called suspended solids, to remove oxidized iron and manganese in drinking water and to prevent silica leakage in boilers. It ensures that the treatment elements to be applied after it are protected from residue. Thus, the water is reduced to minimum microns and gains a colorless and clear appearance without sediment. In anthracite filters, on the other hand, filtration takes place not only with the filtering effect, but also with the adsorption effect. If the right design and selection is made, they can be filtered very effectively and reliably up to 10 micron precision.
QUARTZ SAND
The pollution caused by the undissolved suspended solids (sediment, sand, mud, etc.) in the water is called turbidity. These substances cause blockages in machinery and installations and increase in energy consumption. Removing the pollution caused by suspended solids is done by the filtration process. Keeping the particles will also protect the devices that will be used after it.
DOLAMİT
Kalsiyum ve magnezyumlu karbonat birleşiminde bi










